100% Polyester Round Sling for Lifting Webbing Straps

Precautions for lifting plates

1. When lifting steel plates with an area of more than 6 square meters, steel plate clips are not used, and lifting lugs must be welded.

2. The thickness of the plate used to make the lifting lug shall not be less than 16mm.

3. The steel plate with a hoisting length of more than 6m must use a hoisting shoulder pole.

4. Clamps or special tools must be used when lifting 2 or more plates.

5. It is prohibited to hoist with a single sling.

Select slings of appropriate length that have sufficient capacity and can meet the use mode. If multiple slings are used for lifting load at the same time, the same type of slings must be selected; The raw materials of flat slings shall not be affected by the environment or load. Whether accessories or soft lifting lugs are required, it must be carefully considered that the end of the sling is matched with the auxiliary accessories and lifting equipment.